Tinker & Rasor Model M1/AC Holiday Detector Lamp

Tinker & Rasor Model M1/AC Holiday Detector LampTinker & Rasor Model M1 AC Holiday Detector The same features found in our Model M 1 are also found in the Model M1 AC. The M1 AC is powered by 115 or 230 volt, 60 Hz, A. C. and produces a regulated output voltage of 67. 5 volts D. C. This allows for 24 hour "in plant" operation without down time for battery changes. The M1 AC is used extensively in re bar coating and other production type coating plants. As with all Tinker & Rasor equipment the Model

wraps around pipe

The wrap-over cover design

Non polarity connections

Measurement can be made of peak values with rise time of less than one microsecond

Vehicle clamp hold probe in 90º and 45º angles for pipeline locating

The Models T-1 and T-3 are injection molded using Lexan® polycarbonate plastics to ensure maximum strength and UV protection to guard against failure due to prolonged exposure to sunlight

5 Digital Display

Internal cable storage

Squeegee type brush electrode

For best performance Tinker & Rasor recommends the use of alkaline batteries

concrete structures

This device can give you state of mind while working in pipelines that run through high voltage electrical corridors